Elements Obturation Unit

The Complete Continuous Wave of Condensation™*

System B

One-Touch Controls for Efficiency and Precision

The digital and graphical display incorporates 4 functions – down-pack, backfill, cauterizing and hot pulp testing – each with preset temperatures and durations. One touch changes the default temperature setting on the unit, either temporarily or as an ongoing preset according to your preference. No more frustration attempting to adjust the temperature with a sensitive dial.

Tip Temperature Continuously Maintained and Displayed

The temperature at the tip of the System B plugger is continuously monitored, maintained and displayed digitally in degrees centigrade on the screen.

Time-Out Feature Precludes Overheating

The time-out feature assists new users by shutting off the energy to the tip for an appropriate amount of time for each of the 4 functions. Especially useful for down-pack, the system also provides a sound to indicate its readiness for the separation burst.

Shut-Off Precludes Using Wrong or Worn-Out Tip

If you inadvertently install an incorrect or worn-out tip, the unit will not function until the correct tip is installed.

Plugger Heats Instantly for Immediate Use

When activated, the System B plugger heats instantly,the LED indicator on the handpiece illuminates and the icon for the particular function flashes rapidly on the screen, letting you know it’s in use. It also cools rapidly for greater patient comfort.
EXTRUDER

Motorized Handpiece Eliminates Hand Fatigue, Precludes Voids

The micro-motor-driven extruder automates the backfill process, eliminating the fatiguing manual action required by all other units. Its consistent flow also precludes most voids for a complete, predictable fill.

Pencil Grip Enhances Control, Fits Standard Holders

The unique handpiece design dramatically enhances tactile feedback and manual control of the backfill procedure. The handpiece fits standard handpiece holders.

Precise Temperature Control for Consistency

The proprietary digital circuitry of the Elements unit ensures accurate temperature control geared precisely to gutta percha and RealSeal for the appropriate viscosity each and every time, even unit to unit.

Extra-Long Prebent Needles Offer Convenience

The extruder tips are prebent 45°. Offered in 20, 23 and 25 gauge, the needles are 4 mm longer than conventional needles, which eases posterior access.

Heats Quickly: Shuts Off Automatically

Heats in approximately 45 seconds and shuts off automatically to preclude overheating the backfill material.

Plunger Retracts When Extrusion is Halted

If the handpiece is deactivated before the cartridge is empty, the plunger will retract slightly to prevent excess gutta percha from discharging.

Handpiece Shows Remaining Material

The handpiece has a mechanical gauge that indicates the amount of material remaining in the cartridge.

*The phrase "Continuous Wave of Condensation" is a trademark of Dr. L. Stephen Buchanan.